To take advantage of better technology and current tax credits, wind energy facility owners are repowering their sites, often before the end of the turbines’ expected service lives. Through repowering, owners can boost power capabilities, sometimes by running fewer machines, as well as add to the grid without investing in an entirely new facility, experiencing significant permitting requirements, or needing new electrical interconnections.
What exactly does it mean to repower a wind farm?
There are two options when repowering a wind farm: full repowering or partial repowering. Full repowering involves completely dismantling and replacing turbine equipment at an existing project site. Partial repowering is defined as installing a new drivetrain and rotor on an existing tower and foundation. Partial repowering allows existing wind power projects to be updated with equipment that increases energy production, reduces machine loads, increases grid service capabilities, and improves project reliability at a lower cost and with reduced permitting barriers relative to full repowering and greenfield projects.
Wind repowering—the combined activity of dismantling or refurbishing existing wind turbines and commissioning new ones—plays an important role in the industry. By modernizing the existing wind fleet, repowering sets the stage for future wind industry investments and helps maximize wind energy use in the coming energy transition.
When does it make sense for wind farm owners to consider repowering?
Wind repowering is fundamentally an investment opportunity for the facility owner, enabling owners to retrofit power plants on existing sites with new and/or refurbished technology, including building taller, more efficient wind turbines to increase productivity. By using existing grid connections and infrastructure, repowered projects can often gain further cost-saving advantages compared to new greenfield (or vacant lot) developments.
What are the challenges one might encounter when repowering a wind farm?
The costs associated with constructing or modifying existing foundations to support new turbines can be significant. Foundation work is sometimes required, but not always, and is dependent on engineering evaluations. Barr has developed an industry-leading program to evaluate existing wind turbine foundations for repowering potential—an approach widely accepted by independent engineers, financial institutions, and presented in detail at industry events.
We assist windpower clients with pre-construction permitting and geotechnical investigations, foundation design and construction oversight, repowering evaluations and crane-walk assessments, and damage evaluations to O&M services.
The first step in our process is a desktop evaluation to determine if the proposed foundations can support the new tower loads. These evaluations rely on our design experience, current design practices/codes, and our database of historical foundation performance. Based on these evaluations, we can make a determination if the new specifications can be met.
If the desktop assessment produces an acceptable outcome, the results are then validated with a field assessment. Field investigation is tailored to each project and based on the results of the desktop study, but it typically includes structural health monitoring (SHM) to determine a sample size of foundation performance while turbines are operating. The assessment can also include visual inspections and coring inside the foundations to check for cracking or hidden issues.
At times, the desktop studies and investigations can result in uncertainty. Barr specializes in evaluating this risk and helping clients make decisions on how best to proceed. Whether the conclusion is to reuse the existing foundations, as is, and implement a risk-reduction monitoring program, or to design upgrades or modifications to the existing structures, we partner with owners to complete the necessary evaluations and design documents.
Is there any current funding available for wind repowering projects?
Over the past several years, companies repowering wind facilities utilized the Renewable Electricity Production Tax Credit (PTC), which was phased out at the end of 2021. With the passage of the Inflation Reduction Act (IRA), the PTC has been extended through 2024 for wind-energy projects that begin construction prior to January 1, 2025. In 2025, the PTC will be replaced by the new Clean Electricity Production Tax Credit (45Y), which will support any net-zero power generation technology, including wind facilities, for the following 10 years.
According to previous Internal Revenue Service (IRS) guidance, each wind turbine, pad, and tower is treated like a separate power plant or “facility.” The IRS uses the 80-20 test to determine whether the facility is “new” and thus qualifies for the tax credit. The amount spent on repowering the facility must be at least four times the value of the used parts retained from the old turbine, pad, and tower. Repowering facilities can also qualify for additional incentive boosts from the Clean Electricity PTC if they meet the new prevailing wage and apprenticeship requirements. Additional incentives may be available if the facility is located in an energy community, or meets domestic content requirements, as defined by the IRS.
How can Barr help?
Since 1998, Barr has worked on over 400 windpower projects in 30 states, Canada, Mexico, and South America. In the United States alone, we have provided engineering services for more than 50 percent of the megawatts (MW) installed. We assist windpower clients with pre-construction permitting and geotechnical investigations, foundation design and construction oversight, repowering evaluations and crane-walk assessments, and damage evaluations to O&M services.
For clients, the existing condition of wind turbine foundations and associated investigation results can be a gray area; Barr specializes in evaluating risk and helping clients make decisions about moving forward. Looking for a creative solution related to repowering at your site? Contact us.
Plus, join us at the American Clean Power 2023 Conference & Exhibition on May 22–25 in New Orleans. Connect with Brian Tri, vice president and senior civil/structural engineer, Wes Karras, structural engineer, and other Barr attendees at Booth 2520.
About the authors
Brian Tri, vice president, senior civil/structural engineer, specializes in steel and concrete design for foundations, buildings, and other structures. He has served as design engineer, project manager, engineer of record, and principal engineer for wind-turbine foundations on more than 100 new and repowered wind projects across the country. Brian is a member of the Barr team that provides pre-repowering assessments as well as structure and post-construction inspections for wind power projects. He also helps oversee damage evaluations for wind turbine towers and foundations, which involves site investigation, nondestructive testing, and structural analysis.
Wes Karras, structural engineer, is Barr’s wind-turbine-foundation field program manager and a member of the team that provides pre-repowering assessments as well as structure and post-construction inspections for wind projects. He coordinates foundation inspection and structural health monitoring activities related to wind-turbine-foundation assessments, including repowering. Wes has six years of experience in the wind industry and has served as the design engineer, structural inspector, and project manager on numerous wind power projects across the country.
To take advantage of better technology and boost capabilities, one of the largest clean energy developers in the United States sought to replace existing turbines with new models. Barr assisted this client by performing a structural assessment for the repowering of a 150-megawatt wind farm. The findings and recommendations allowed the client to move ahead with repowering while continuing to produce power for 40,000 households.
Xcel Energy retained Barr to complete a supplemental geotechnical evaluation for a wind repowering project located in Nobles County, Minnesota. This evaluation included an assessment of soil behavior subjected to cyclic foundation loading for the proposed repower locations. The field campaign focused on undisturbed thin-wall samples collected at a depth corresponding to the base of the turbine foundation, while the laboratory testing program centered around cyclic triaxial strength to assess the behavior of the soil under enhanced foundation loading associated with the repower.
Barr was retained for design services related to geotechnical analysis, engineering, and reporting for evaluation of selected crane path travel-ways at Kings Point Wind Project. Barr provided crane walk pre-planning and construction-phase geotechnical engineering services in support of the construction of a new wind farm. The evaluation utilized both data collected during the design-phase geotechnical investigation for wind turbine foundation design, and supplemental investigation along crane path travel-ways.