For fuel and electricity producers, evolving fuel standards soon may lead to changes in your formula for success. At the U.S. federal level, standards for biofuel blending volumes—specified by the second-generation U.S. Federal Renewable Fuel Standard (RFS)—are due for a transition after 2022.
The range of potential outcomes include:
No change: EPA sets future renewable-fuels targets
A third generation of the RFS: Congress sets future targets
A national Low Carbon Fuel Standard
RFS is repealed and not replaced
California introduced its LCFS in 2009, spurring significant investments in renewable fuel production and a net decrease in the carbon intensity of fuels used in the state. In addition, Oregon and Washington each have a CFS, and several other states, such as Minnesota, are evaluating new standards. British Columbia has an LCFS, and final regulations for a Canadian Clean Fuel Standard are targeted to be published this spring.
For affected businesses, it may be helpful to assess the carbon intensity of your operations today and determine how the existing and new fuel standards could impact your operations and profitability. To start, feasibility studies can identify which investments will pay off the most in reducing carbon intensity across the value chain for your operations. Barr routinely assists clients with these early, exploratory steps, as well as with later stages, such as design and permitting. Contact us to learn more.
Chandler Taylor is a vice president and senior environmental consultant with more than three decades of experience. In his role, Chandler manages and conducts projects involving Phase I environmental site assessments, remedial investigations and cleanups, environmental compliance projects and audits, environmental management systems, and environmental data management.
Financing your project with federal infrastructure funding
SEC proposes broad climate-related reporting rules
Fuel standards and carbon intensity to drive profitability
New PFAS rule to have broad implications
Restoration project near Lake Superior wins top honor
Slope stabilization puts mine site back in operation
Receive the latest editions right to your inbox and explore industry trends, projects, and company news.
Collecting data from the skies with reality capture technology
Green infrastructure and stacked-benefits projects
EPA proposes maximum contaminant levels for six PFAS in drinking water
Minnesota DNR releases new commercial solar siting guidance
Emerging PFAS destruction technologies
The Inflation Reduction Act: Manufacturing focus
Domestic uranium production on the rise
EPA's latest proposed rule eliminates PFAS reporting exemption
Introducing Barr’s ugly holiday sweater contest winner
Civil designs create homes for the holidays
Designing Africa's first potash processing facility
Q&A: Are mussels impeding your underwater project?
EPA begins enforcement of coal-ash disposal rule
Floodplain management expert joins Barr
From our CEO
Designing Africa’s first potash mine
The Inflation Reduction Act: Mining focus
The Inflation Reduction Act: Power focus
A deeper look into the promising new PFAS destruction approach
Tailings storage facilities: A unique challenge for a critical industry
The Inflation Reduction Act: Fuels focus
Making an impact in the Rocky Mountain Region
From Boy Scout to Senior NEPA Consultant
Stabilizing a community's backup water supply
Q&A: In your ESG journey, keep the destination in mind
Inflation Reduction Act opens door for energy investment
Reviving landings on Lake Michigan's Plum and Pilot Islands
PFAS: What’s all the hype?
Becoming an environmental engineer, despite the odds
Siting a solar farm on brownfields, landfills, and former industrial sites
Analyzing climate change risks with GIS mapping
Explosives engineering: Is it as dangerous as it sounds?
Is biological sulfate treatment the key?
Achieving work-life balance as a female engineer and military spouse
Acid rock drainage: More than just a mining project concern?
Incorporating environmental, social, and governance (ESG) strategies
Developing long-term PFAS solutions
Establishing climate change adaptation strategies
Designing new tools and solutions for stormwater quality improvement
Maximizing the usefulness of big data and the Internet of Things (IoT)
Uncovering the technical challenges of paste, filtered tailings, and mine backfill
Adding value with technology-enhanced imaging
Navigating floodwater management
Harnessing the power of computational fluid dynamics (CFD) technology
Delivering innovation on Department of Energy projects
Q&A: Spotlight on safety
Transforming water treatment plant design
Unlock funding for abandoned mines
Proactive permitting strategy powers solar project success
Stormwater: Underground and under control
Stormwater management plan promotes sustainability
First steps toward fixing a dam
Which tailings management solution is right for your mine?
Turn the pieces into a picture with a data integration plan
"Backyard" rainwater feature reduces downstream pollutants
Modeling roadmap helps manage chloride levels
Statistics unlock answers to contamination questions
Getting started on your ESG journey? Barr can help
Water ride makes a splash at Branson theme park
Facing climate-change challenges with confidence
TRI updates include new reporting requirements
Q&A: Survey season in Michigan
Are trolley-assist haul trucks the next advancement for Minnesota mines?
Barr names Ward Swanson as president and CEO
Island Lake Dam repair project wins engineering award
Barr establishes office in Reno to support client projects
Navigating new S-K 1300 reporting standard
Addressing the risks of acid-generating materials
Renewable natural gas projects turn waste to energy
Brownfields open doors for clean-energy development
Enhancing flood-protection measures in North Dakota
Inspecting a stormwater tunnel during river drawdown
Working with the weather during inversions
Barr acquires Michigan environmental firm
From the CEO